
SCSxx05/SCSxx20 User Guide 2: Installation
2-6
Power Manager Interface
The SCSxx20 has a dedicated port for the Lantronix PCU8 Power Control Unit.
With the SCSxx05 (and the SCSxx20, if desired), you may use any available
device port. The PCU8 uses a DB9 connector on its serial connector and
requires a Part Number 200.0069 DB9 to RJ45 adapter for that connection.
(Lantronix supplies one such adapter with each PCU8 system).
The required (default of PCU8) communication parameters for a device port for
use as a power manager port are:
9600 baud
8 data bits
1 stop bit
No parity
XON/XOFF flow control
DTE port type
Refer to the PCU8 documentation for baud rate options.
Komentáře k této Příručce