Lantronix ETS16PR Uživatelský manuál stáhnout pdf (Strana 29)

Printing on the ETS

ETS Installation Guide 29

Note: Lantronix uses the following convention to identify the TCP ports on

the ETS: 3000 + port number. For example: Port 1 = 3001, Port 2 = 3002,

Port 3 = 3003 etc.

8. If configuring the printer to use a LPR port, select LPR. Identify the appropriate

ETS service to use in the Queue Name field.

To determine the services running on the ETS do the following:

Access the ETS Local> prompt (via telnet or a terminal console).

Type

SET PRIV and enter the privileged user password (default password is

SYSTEM) .

Type

SHOW SERVICES LOCAL.

To configure a service, use the following commands from the privileged user

prompt on the ETS:

Local>> DEFINE SERVICE (ETS_HPLaserjet) port

(x) enable

(substitute your own values for the entries in parentheses)

Local>> INITIALIZE DELAY 0

After the reboot use the following command to display the status of the newly defined

service:

Local>> SHOW SERVICE (ETS_HPLaserjet) CHAR

9. Click OK. Click Next.

10. Identify the Manufacturer and Model of the print device used. Provide the

appropriate driver if prompted.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 67 68

Žádné komentáře

Lantronix ETS16PR Uživatelský manuál Strana 29