Lantronix Switch 900-510 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Sítě Lantronix Switch 900-510. Lantronix Switch 900-510 User's Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 280
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků

Shrnutí obsahu

Strany 1

Part Number 900-510 Revision C October 2013 SLB™ Branch Office Manager User Guide

Strany 2 - Sales Offices

SLB™ Branch Office Manager User Guide 10 1: About This Guide Purpose and Audience This guide provides the information needed to install, confi

Strany 3 - Warranty

8: Device Ports SLB™ Branch Office Manager User Guide 100 Sylog Logging Data can be logged to the system log. If this feature is enabled, the data

Strany 4 - Table of Contents

8: Device Ports SLB™ Branch Office Manager User Guide 101 Email/SNMP Traps Email/Traps Select the checkbox to enable email and SNMP logging. Email

Strany 5

8: Device Ports SLB™ Branch Office Manager User Guide 102 Text String The specific pattern of characters the SLB branch office manager must recogni

Strany 6

8: Device Ports SLB™ Branch Office Manager User Guide 103 PC Card Logging PC Card Logging Select to enable PC Card logging. A PC Card Compact Flash

Strany 7

8: Device Ports SLB™ Branch Office Manager User Guide 104 emailrestart <Restart Delay> emailsend <email|trap|both> emailstring <Rege

Strany 8

8: Device Ports SLB™ Branch Office Manager User Guide 105 2. Change the following as desired: Baud The speed with which the device port exchanges

Strany 9 - List of Tables

8: Device Ports SLB™ Branch Office Manager User Guide 106 To configure console port settings: set consoleport <one or more parameters> Param

Strany 10 - 1: About This Guide

8: Device Ports SLB™ Branch Office Manager User Guide 107 2. Enter the following: Switching Delay Number of milliseconds the SLB branch office ma

Strany 11 - Additional Documentation

8: Device Ports SLB™ Branch Office Manager User Guide 108 should be on, off, or returned to the state it was in before the reboot. Default is Off.

Strany 12 - 2: Overview

8: Device Ports SLB™ Branch Office Manager User Guide 109 2. Enter the following: Note: To clear fields in the lower part of the page, click the

Strany 13

1: About This Guide SLB™ Branch Office Manager User Guide 11 Chapter Summary 12: Maintenance and Operation Provides instructions for upgrading fir

Strany 14 - Benefits

8: Device Ports SLB™ Branch Office Manager User Guide 110 Escape Sequence The escape character used to get the attention of the SSH or Telnet clie

Strany 15 - Table 2-1. SLB Models

8: Device Ports SLB™ Branch Office Manager User Guide 111 To view or update a host list: 1. In the Host Lists table, select the host list and clic

Strany 16 - System Features

8: Device Ports SLB™ Branch Office Manager User Guide 112 Escape Sequence The escape character used to get the attention of the SSH or Telnet clie

Strany 17 - Configuration Options

8: Device Ports SLB™ Branch Office Manager User Guide 113 To add a new host entry to a list or edit an existing entry: set hostlist add|edit <Ho

Strany 18 - Application Example

SLB™ Branch Office Manager User Guide 114 9: PC Cards You can use the PC Card page to configure storage (Compact Flash) and modem/ISDN PC card

Strany 19 - Hardware Features

9: PC Cards SLB™ Branch Office Manager User Guide 115 4. Enter the following settings for the selected PC Card: Storage Settings Mount Select th

Strany 20 - Serial Connections

9: PC Cards SLB™ Branch Office Manager User Guide 116 Filesystem Select ext2 or FAT, the file systems the SLB device supports. 5. Click the Appl

Strany 21 - PC Card Interface

9: PC Cards SLB™ Branch Office Manager User Guide 117 4. Enter or view the following: State Select to indicate whether to disable the PC Card o

Strany 22 - 3: Installation

9: PC Cards SLB™ Branch Office Manager User Guide 118 Mode The format in which the data flows back and forth. With Text selected, the SLB branch of

Strany 23 - Technical Specifications

9: PC Cards SLB™ Branch Office Manager User Guide 119 Parity Parity checking is a rudimentary method of detecting simple, single-bit errors. From t

Strany 24 - Physical Installation

SLB™ Branch Office Manager User Guide 12 2: Overview The SLB branch office manager enables IT System Administrators to manage remote servers a

Strany 25 - Connecting a Terminal

9: PC Cards SLB™ Branch Office Manager User Guide 120 Negotiated IP IP address associated with the GPRS connection. Text Mode Timeout Logins If you

Strany 26 - Connecting to a Power Source

9: PC Cards SLB™ Branch Office Manager User Guide 121 DOD Authentication Enables PAP or CHAP authentication for dial-in & dial-on-demand. PAP i

Strany 27 - Typical Installations

9: PC Cards SLB™ Branch Office Manager User Guide 122 TCP Port The TCP (raw) session port number to use if you selected TCP. Defaults: Upper PC Car

Strany 28

9: PC Cards SLB™ Branch Office Manager User Guide 123 Removes a file on a Compact Flash card: pccard storage delete <upper|lower> file <Cu

Strany 29 - 4: Quick Setup

9: PC Cards SLB™ Branch Office Manager User Guide 124 modemmode <text|ppp> modemstate <disable|dialout|dialin|dialback|dialondemand| diali

Strany 30 - Before You Begin

SLB™ Branch Office Manager User Guide 125 10: Connections Chapter 8: Device Ports described how to configure and interact with an SLB branch o

Strany 31 - Entering the Settings

10: Connections SLB™ Branch Office Manager User Guide 126 VT100 Terminals SLB Branch Office Manager Server Typical Setup Scenarios for the SLB Dev

Strany 32

10: Connections SLB™ Branch Office Manager User Guide 127 SLB Branch Office Manager Reverse Terminal Server In this scenario, the SLB branch off

Strany 33 - Restoring Factory Defaults

10: Connections SLB™ Branch Office Manager User Guide 128 Modem Settings section of the Device Ports – Settings web page. A user could then dial in

Strany 34 - Network Settings

10: Connections SLB™ Branch Office Manager User Guide 129 Connection Configuration To create a connection: 1. Click the Devices tab and select th

Strany 35 - Date & Time Settings

2: Overview SLB™ Branch Office Manager User Guide 13 Meets Needs of Branch Offices Designed to meet the specific needs of the remote branch offi

Strany 36 - Administrator Settings

10: Connections SLB™ Branch Office Manager User Guide 130 to From the drop-down list, select a destination for the connection: a device port connec

Strany 37

10: Connections SLB™ Branch Office Manager User Guide 131 To view, update, or disconnect a current connection: The bottom of the Connections web pa

Strany 38

10: Connections SLB™ Branch Office Manager User Guide 132 To monitor a device port: connect listen deviceport <Device Port # or Name> To conn

Strany 39 - Next Step

10: Connections SLB™ Branch Office Manager User Guide 133 ssh <IP Address or Name> [port <TCP Port] >] <SSH flags>] where

Strany 40 - Web Interface

SLB™ Branch Office Manager User Guide 134 11: User Authentication Users who attempt to log in to the SLB branch office manager by means of Tel

Strany 41 - Entry Fields and

11: User Authentication SLB™ Branch Office Manager User Guide 135 2. To enable a method currently in the Disabled methods list, select the method

Strany 42 - Web Page Help

11: User Authentication SLB™ Branch Office Manager User Guide 136 TACACS+ (Terminal Access Controller Access Control System) TACACS+ allows a remot

Strany 43 - Command Line Interface

11: User Authentication SLB™ Branch Office Manager User Guide 137 Local and Remote Users The system administrator can configure the SLB device to u

Strany 44 - Command Syntax

11: User Authentication SLB™ Branch Office Manager User Guide 138 Local User Passwords Complex Passwords Select to enable the SLB branch office man

Strany 45

11: User Authentication SLB™ Branch Office Manager User Guide 139 2. Enter the following information for the user: Login User ID of selected user

Strany 46 - General CLI Commands

2: Overview SLB™ Branch Office Manager User Guide 14 Typical Equipment You can configure, administer, and manage IT equipment in a variety of ways,

Strany 47 - 6: Basic Parameters

11: User Authentication SLB™ Branch Office Manager User Guide 140 Access Outlets The outlets the user may monitor and configure. Enable for Dial-b

Strany 48 - Eth1 and Eth2 Settings

11: User Authentication SLB™ Branch Office Manager User Guide 141 3. Assign rights to users. Each user is a member of a group that has a predefine

Strany 49

11: User Authentication SLB™ Branch Office Manager User Guide 142 5. Click the Back to Local/Remote Users link to return to the Local/Remote User

Strany 50 - Gateway

11: User Authentication SLB™ Branch Office Manager User Guide 143 Local Users Commands The following CLI commands correspond to the web page entrie

Strany 51 - Ethernet Counters

11: User Authentication SLB™ Branch Office Manager User Guide 144 To view settings for all users or a local user: show localusers [user <User Lo

Strany 52

11: User Authentication SLB™ Branch Office Manager User Guide 145 To configure attributes for users who log in by a remote authentication method: s

Strany 53 - IP Filter

11: User Authentication SLB™ Branch Office Manager User Guide 146 2. Enter the following: Enable NIS Displays selected if you enabled this method

Strany 54 - Configuring IP Filters

11: User Authentication SLB™ Branch Office Manager User Guide 147 Custom Menu If custom menus have been created you can assign a default custom me

Strany 55 - Rule Parameters

11: User Authentication SLB™ Branch Office Manager User Guide 148 Secure Lantronix Network Right to view and manage secure IT management units (e.g

Strany 56 - Mapping a Rule Set

11: User Authentication SLB™ Branch Office Manager User Guide 149 To configure the SLB branch office manager to use NIS to authenticate users who l

Strany 57

2: Overview SLB™ Branch Office Manager User Guide 15 The SLB device also provides features such as convenient text menu systems, break-safe operati

Strany 58 - Routing

11: User Authentication SLB™ Branch Office Manager User Guide 150 LDAP allows SLB users to authenticate using a wide variety of LDAP servers, such

Strany 59 - Equivalent Routing Commands

11: User Authentication SLB™ Branch Office Manager User Guide 151 Base The name of the LDAP search base (e.g., dc=company, dc=com). May have up to

Strany 60 - 7: Services

11: User Authentication SLB™ Branch Office Manager User Guide 152 Group Select the group to which the LDAP users will belong: Default Users: This g

Strany 61 - System Logging

11: User Authentication SLB™ Branch Office Manager User Guide 153 LDAP Commands These commands for the command line interface correspond to the web

Strany 62

11: User Authentication SLB™ Branch Office Manager User Guide 154 RADIUS The system administrator can configure the SLB branch office manager to us

Strany 63 - Phone Home

11: User Authentication SLB™ Branch Office Manager User Guide 155 Enable RADIUS Displays selected if you enabled this method on the User Authentica

Strany 64

11: User Authentication SLB™ Branch Office Manager User Guide 156 Break Sequence A series of 1-10 characters users can enter on the command line in

Strany 65 - Version 3

11: User Authentication SLB™ Branch Office Manager User Guide 157 Reboot & Shutdown Right to use the CLI or shut down the SLB branch office man

Strany 66 - V3 Read-Write User

11: User Authentication SLB™ Branch Office Manager User Guide 158 To set user group and permissions for RADIUS users: set radius group <default|

Strany 67

11: User Authentication SLB™ Branch Office Manager User Guide 159 2. Enter the following: Enable Kerberos Displays selected if you enabled this

Strany 68 - To view current services:

2: Overview SLB™ Branch Office Manager User Guide 16 Figure 2-1. SLB 8 Front Figure 2-2. SLB 8 Back — 8 Device Ports, 4 Power Outlets, 8 Switch

Strany 69 - NFS and SMB/CIFS

11: User Authentication SLB™ Branch Office Manager User Guide 160 KDC IP Address Enter the IP address of the Key Distribution Center (KDC). KDC Po

Strany 70 - SMB/CIFS Share

11: User Authentication SLB™ Branch Office Manager User Guide 161 Full Administrative Right to add, update, and delete all editable fields. Network

Strany 71

11: User Authentication SLB™ Branch Office Manager User Guide 162 PC Card Right to enter modem settings for PC cards. Power Outlets Right to confi

Strany 72 - Secure Lantronix Network

11: User Authentication SLB™ Branch Office Manager User Guide 163 To view Kerberos settings: show kerberos TACACS+ Similar to RADIUS, the main fu

Strany 73

11: User Authentication SLB™ Branch Office Manager User Guide 164 2. Enter the following: Enable TACACS+ Displays selected if you enabled this met

Strany 74

11: User Authentication SLB™ Branch Office Manager User Guide 165 Group Select the group to which the TACACS+ users will belong: Default Users: Thi

Strany 75

11: User Authentication SLB™ Branch Office Manager User Guide 166 TACACS+ Commands These commands for the command line interface correspond to the

Strany 76 - Date and Time

11: User Authentication SLB™ Branch Office Manager User Guide 167 not used, a user can access multiple hosts without entering a password. In either

Strany 77

11: User Authentication SLB™ Branch Office Manager User Guide 168 2. Enter the following: Imported Keys (SSH In) Host & User Associated with

Strany 78

11: User Authentication SLB™ Branch Office Manager User Guide 169 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAEEApUHCX9EWsHt+jmUGXa1YC3us ABYxIXUhSU1N+NU9HNa

Strany 79

2: Overview SLB™ Branch Office Manager User Guide 17 Protocols Supported The SLB branch office manager supports the TCP/IP network protocol as well

Strany 80

11: User Authentication SLB™ Branch Office Manager User Guide 170 Host and Login for Export Export via Select the method (SCP, FTP, or Cut and Pas

Strany 81 - Global Port Settings

11: User Authentication SLB™ Branch Office Manager User Guide 171 2. View or enter the following: Reset to Default Host Key Select the All Keys c

Strany 82

11: User Authentication SLB™ Branch Office Manager User Guide 172 Public Key Filename Filename of the public host key. Private Key Filename Filena

Strany 83 - Global Commands

11: User Authentication SLB™ Branch Office Manager User Guide 173 To export a key: set sshkey export <ftp|scp|copypaste> <one or more para

Strany 84 - Device Ports – Settings

11: User Authentication SLB™ Branch Office Manager User Guide 174 To display SSH keys that have been imported: show sshkey import <one or more p

Strany 85

11: User Authentication SLB™ Branch Office Manager User Guide 175  Maximum of five nested menus can be called.  No syntax checking (Enter each

Strany 86

11: User Authentication SLB™ Branch Office Manager User Guide 176 Example The system administrator creates two custom user menus, with menu1 having

Strany 87

11: User Authentication SLB™ Branch Office Manager User Guide 177 __Custom User Menus___________________________________________________________ Me

Strany 88 - Modem Settings

11: User Authentication SLB™ Branch Office Manager User Guide 178 Menu1 Title -------------------------------------

Strany 89 - Modem Settings: Text Mode

SLB™ Branch Office Manager User Guide 179 12: Maintenance and Operation The system administrator performs maintenance activities and operates

Strany 90 - Modem Settings: PPP Mode

2: Overview SLB™ Branch Office Manager User Guide 18 Application Example The figure below is an example deployment. An SLB branch office manager is

Strany 91 - Port Status and Counters

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 180 2. Enter the following: General Reboot Select this option to reboot the S

Strany 92 - SLP Status/Info

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 181 Login Banner The text to display on the command line interface after the us

Strany 93 - SLP Commands

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 182 Boot Banks Bank 1 Version of SLB firmware in bank 1. Note: The word "

Strany 94

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 183 Location for Save, Restore, or Manage If you selected to save or restore a

Strany 95

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 184 2. To delete files, select one or more files and click the Delete button.

Strany 96

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 185 2. If desired, enter the following: Reset to Default Certificate To reset

Strany 97

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 186 iGoogle Gadgets You can create an iGoogle gadgets that enables you to view

Strany 98 - Device Ports – Logging

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 187 Administrative Commands These commands for the command line interface corr

Strany 99 - Email/SNMP Notification

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 188 To enable or disable iGoogle Gadget web content: admin web gadget <enabl

Strany 100 - Sylog Logging

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 189 To view keypad settings: admin keypad show To set the FTP/TFTP/SFTP server

Strany 101 - Email/SNMP Traps

2: Overview SLB™ Branch Office Manager User Guide 19 A system administrator, upon losing IP connectivity to a server, takes the following steps: 

Strany 102 - NFS File Logging

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 190 To delete a saved configuration: admin config delete <Config Name> lo

Strany 103 - Logging Commands

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 191 2. Enter the following: Log Select the type(s) of log you want to view. L

Strany 104 - Console Port

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 192 4. To email the system log to an individual: a) In the Comment field, en

Strany 105 - Console Port Commands

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 193 System Log Command The following command for the command line interface cor

Strany 106 - Power Outlets

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 194 2. To select a sort option (by Date/Time, User, Command/Action, click the

Strany 107 - 8: Device Ports

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 195 2. Enter the following: Select Diagnostics Select one or more diagnostic

Strany 108 - Host Lists

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 196 Send Packet This option sends an Ethernet packet out one of the Ethernet po

Strany 109 - Host Parameters

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 197 4. To view a report, click the link for that report. 5. To email the re

Strany 110

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 198 Diagnostic Commands The following CLI commands correspond to the web page e

Strany 111

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 199 To generate and send Ethernet packets: diag sendpacket host <IP Address

Strany 112 - Host List Commands

SLB™ Branch Office Manager User Guide 2 Copyright & Trademark © 2013 Lantronix, Inc. All rights reserved. No part of the contents of this book

Strany 113

2: Overview SLB™ Branch Office Manager User Guide 20 2 The max input/output current is de-rated to 16A when using the optional NEMA 5-20P (20A) cab

Strany 114 - 9: PC Cards

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 200 The top half of the page displays the status of each port, power supply, a

Strany 115 - Storage Settings

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 201 4. To view a report, click the link for that report. 5. To email the rep

Strany 116

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 202 Status Commands These commands for the command line interface correspond to

Strany 117

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 203 2. Enter the following: Event Trigger From the drop-down list, select the

Strany 118 - Data Settings

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 204 SNMP Trap OID Enter a unique identifier for an SNMP object. (An SNMP object

Strany 119 - GSM/GPRS Settings

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 205 To update event definitions: admin events edit <Event ID> <paramet

Strany 120 - PPP Mode

SLB™ Branch Office Manager User Guide 206 13: Application Examples Each SLB branch office manager has multiple serial ports and two network po

Strany 121 - IP Settings

13: Application Examples SLB™ Branch Office Manager User Guide 207 Telnet/SSH to a Remote Device The following figure shows a Sun server connected

Strany 122 - PC Card Commands

13: Application Examples SLB™ Branch Office Manager User Guide 208 3. Connect to the device port: [SLB]> connect direct deviceport 2 4. View m

Strany 123 - PC Card Modem Commands

13: Application Examples SLB™ Branch Office Manager User Guide 209 [SLB]> 2. Configure the device port that is connected to the console port o

Strany 124

2: Overview SLB™ Branch Office Manager User Guide 21 Network Connections The SLB network interfaces are 10Base-T/100Base-TX connectors for use with

Strany 125 - 10: Connections

13: Application Examples SLB™ Branch Office Manager User Guide 210 Local Serial Connection to Network Device via Telnet This example shows a termin

Strany 126 - Remote Access Server

13: Application Examples SLB™ Branch Office Manager User Guide 211 Byte Threshold: 100 Max number of files: 10 Email Delay: 60 secon

Strany 127 - Console Server

SLB™ Branch Office Manager User Guide 212 14: Command Reference After an introduction to using commands, this chapter lists and describes all

Strany 128

14: Command Reference SLB™ Branch Office Manager User Guide 213 Table 14-1. Actions and Category Options Action Category set network | ipfilter |

Strany 129 - Connection Configuration

14: Command Reference SLB™ Branch Office Manager User Guide 214  Use the up and down arrows to scroll through previously entered commands. If des

Strany 130

14: Command Reference SLB™ Branch Office Manager User Guide 215 admin config delete Syntax admin config delete <Config Name> location <def

Strany 131 - Connection Commands

14: Command Reference SLB™ Branch Office Manager User Guide 216 Description Saves the current SLB configuration to a selected location. admin confi

Strany 132

14: Command Reference SLB™ Branch Office Manager User Guide 217 admin ftp password Syntax admin ftp password Description Sets the FTP server passwo

Strany 133

14: Command Reference SLB™ Branch Office Manager User Guide 218 Description Displays keypad settings. admin lcd reset Syntax admin lcd reset Descri

Strany 134 - 11: User Authentication

14: Command Reference SLB™ Branch Office Manager User Guide 219 admin web certificate Syntax admin web certificate import via <sftp|scp> cert

Strany 135

SLB™ Branch Office Manager User Guide 22 3: Installation This chapter provides a high-level procedure for installing the SLB branch office man

Strany 136 - Authentication Commands

14: Command Reference SLB™ Branch Office Manager User Guide 220 admin web terminate Syntax admin web terminate <Session ID> Description Termi

Strany 137 - Local and Remote Users

14: Command Reference SLB™ Branch Office Manager User Guide 221 Local Users authentication is always the first method used. Any methods omitted fro

Strany 138 - Local/Remote User Settings

14: Command Reference SLB™ Branch Office Manager User Guide 222 Description Configures the SLB branch office manager to use Kerberos to authenticat

Strany 139

14: Command Reference SLB™ Branch Office Manager User Guide 223 show ldap Description Displays LDAP settings: Syntax show ldap Local Users Commands

Strany 140

14: Command Reference SLB™ Branch Office Manager User Guide 224 set localusers allowreuse Syntax set localusers allowreuse <enable|disable> D

Strany 141

14: Command Reference SLB™ Branch Office Manager User Guide 225 set localusers password Syntax set localusers password <User Login> Descripti

Strany 142 - Shortcut

14: Command Reference SLB™ Branch Office Manager User Guide 226 NIS Commands set nis Syntax set nis <one or more parameters> Parameters acces

Strany 143 - Local Users Commands

14: Command Reference SLB™ Branch Office Manager User Guide 227 RADIUS Commands set radius Syntax set radius <one or more parameters> Paramet

Strany 144 - Local User Rights Commands

14: Command Reference SLB™ Branch Office Manager User Guide 228 TACACS+ Commands set tacacs+ Syntax set tacacs+ <one or more parameters> Para

Strany 145

14: Command Reference SLB™ Branch Office Manager User Guide 229 Description Adds a local user to a user group or changes the group the user belongs

Strany 146

3: Installation SLB™ Branch Office Manager User Guide 23 Verify and inspect the contents of the SLB package using the enclosed packing slip or the

Strany 147

14: Command Reference SLB™ Branch Office Manager User Guide 230 where <Permission List> is one or more of nt, sv, dt, lu, ra, sk, um, dp, pc

Strany 148 - NIS Commands

14: Command Reference SLB™ Branch Office Manager User Guide 231 Description Sets permissions not already defined by the assigned permissions group.

Strany 149

14: Command Reference SLB™ Branch Office Manager User Guide 232 Description Allow (unlock) a user’s ability to log in. show cli Syntax show cli Des

Strany 150

14: Command Reference SLB™ Branch Office Manager User Guide 233 charxfer <toendpoint|fromendpoint> date <MMDDYYhhmm[ss]> deviceport <

Strany 151

14: Command Reference SLB™ Branch Office Manager User Guide 234 connect global outgoingtimeout Syntax connect global outgoingtimeout <disable|1-

Strany 152 - 5. Click the Apply button

14: Command Reference SLB™ Branch Office Manager User Guide 235 telnet <IP Address or Name> [port <TCP Port] trigger <now|datetime|char

Strany 153 - LDAP Commands

14: Command Reference SLB™ Branch Office Manager User Guide 236 Description Configures console port settings. show consoleport Syntax show consolep

Strany 154

14: Command Reference SLB™ Branch Office Manager User Guide 237 title <Menu Title> Description Changes a command within an existing custom us

Strany 155

14: Command Reference SLB™ Branch Office Manager User Guide 238 show datetime Syntax show datetime Description Displays the local date, time, and t

Strany 156

14: Command Reference SLB™ Branch Office Manager User Guide 239 slp outletcontrol state <on|off|cyclepower> [outlet <Outlet #>][tower &

Strany 157 - RADIUS Commands

3: Installation SLB™ Branch Office Manager User Guide 24 Relative Humidity Operating: 10% to 90% non-condensing Storage: 10% to 90% non-condensing

Strany 158 - Kerberos

14: Command Reference SLB™ Branch Office Manager User Guide 240 calleridcmd <Modem Command String> calleridlogging <enable| disable> ch

Strany 159

14: Command Reference SLB™ Branch Office Manager User Guide 241 remoteipaddr <negotiate|IP Address> restartdelay <PPP Restart Delay> sl

Strany 160

14: Command Reference SLB™ Branch Office Manager User Guide 242 Description Displays a list of all device port names. show deviceport port Syntax s

Strany 161

14: Command Reference SLB™ Branch Office Manager User Guide 243 diag internals Syntax diag internals Description Displays information on the intern

Strany 162 - Kerberos Commands

14: Command Reference SLB™ Branch Office Manager User Guide 244 xferdatasize <Size In Kbytes to Transfer> Default is 1 Kbyte. Description Te

Strany 163 - TACACS+

14: Command Reference SLB™ Branch Office Manager User Guide 245 Events Commands admin events add Syntax admin events add <receivetrap> <re

Strany 164

14: Command Reference SLB™ Branch Office Manager User Guide 246 admin events show Syntax admin events show Description Displays event definitions.

Strany 165

14: Command Reference SLB™ Branch Office Manager User Guide 247 set hostlist delete Syntax set hostlist delete <Host List> [entry <Host N

Strany 166 - SSH Keys

14: Command Reference SLB™ Branch Office Manager User Guide 248 edit <Ruleset Name> <Edit Parameters> Edit Parameters: append insert &

Strany 167 - Exported Keys

14: Command Reference SLB™ Branch Office Manager User Guide 249 sysloglogging <enable|disable> Description Configures logging settings for on

Strany 168 - Imported Keys (SSH In)

3: Installation SLB™ Branch Office Manager User Guide 25 Connecting to a Device Port You can connect any device that has a serial console port to a

Strany 169 - Exported Keys (SSH Out)

14: Command Reference SLB™ Branch Office Manager User Guide 250 set network dns Syntax set network dns <1|2|3> ipaddr <IP Address> Desc

Strany 170

14: Command Reference SLB™ Branch Office Manager User Guide 251 show network dns Syntax show network dns Description Displays DNS settings. show ne

Strany 171

14: Command Reference SLB™ Branch Office Manager User Guide 252 mount <enable|disable> remdir <Remote NFS Directory> rw <enable|disa

Strany 172 - SSH Commands

14: Command Reference SLB™ Branch Office Manager User Guide 253 show nfs Syntax show nfs Description Displays NFS share settings. PC Card Storage C

Strany 173

14: Command Reference SLB™ Branch Office Manager User Guide 254 PC Card Modem Commands pccard modem Syntax pccard modem <upper|lower> <par

Strany 174 - Custom User Menus

14: Command Reference SLB™ Branch Office Manager User Guide 255 remoteipaddr <negotiate|IP Address> restartdelay <PPP Restart Delay> se

Strany 175

14: Command Reference SLB™ Branch Office Manager User Guide 256 set power switchingdelay Syntax set power switchingdelay <Delay in msec> Desc

Strany 176 - Example

14: Command Reference SLB™ Branch Office Manager User Guide 257 Services Commands set services Syntax set services <one or more services paramet

Strany 177

14: Command Reference SLB™ Branch Office Manager User Guide 258 trapcommunity <Trap Community> v1ssh <enable|disable> v3password <Pa

Strany 178

14: Command Reference SLB™ Branch Office Manager User Guide 259 show slcnetwork Syntax show slcnetwork [ipaddrlist <all|Address Mask>] Descri

Strany 179 - SLB Maintenance

3: Installation SLB™ Branch Office Manager User Guide 26 see D: Adapters and Pinouts and our web site at www.lantronix.com/support and click Cable

Strany 180 - General

14: Command Reference SLB™ Branch Office Manager User Guide 260 [path <Path to Copy Key>] bits <512|1024> keyname <SSH Key Name>

Strany 181 - SLB Firmware

14: Command Reference SLB™ Branch Office Manager User Guide 261 Parameters [keyhost <SSH Key IP Address or Name>] [keyuser <SSH Key User&g

Strany 182 - Configuration Management

14: Command Reference SLB™ Branch Office Manager User Guide 262 Description Provides details, for example, endpoint parameters and trigger, for a s

Strany 183

14: Command Reference SLB™ Branch Office Manager User Guide 263 level <error|warning|info|debug> log <all|netlog|servlog|authlog|devlog|di

Strany 184

SLB™ Branch Office Manager User Guide 264 A: Bootloader The SLM management appliance provides a bootload command interface. This interface is

Strany 185

A: Bootloader SLB™ Branch Office Manager User Guide 265 Displays information about the current user. Administrator Commands In addition to the com

Strany 186

SLB™ Branch Office Manager User Guide 266 B: Security Considerations The SLB branch office manager provides data path security by means of SSH

Strany 187 - Administrative Commands

SLB™ Branch Office Manager User Guide 267 C: Safety Information Safety Precautions Please follow the safety precautions described below when i

Strany 188

C: Safety Information SLB™ Branch Office Manager User Guide 268 − Install only in restricted access areas (dedicated equipment rooms, equipment clo

Strany 189

SLB™ Branch Office Manager User Guide 269 D: Adapters and Pinouts The serial device ports of the SLB branch office manager products match the

Strany 190 - System Logs

3: Installation SLB™ Branch Office Manager User Guide 27 The status of the power outlets displays on the front panel LCD display as the default dis

Strany 191

D: Adapters and Pinouts SLB™ Branch Office Manager User Guide 270 RJ45 Receptacle to DB25M DCE Adapter for the SLB Device (PN 200.2066A)

Strany 192

D: Adapters and Pinouts SLB™ Branch Office Manager User Guide 271 RJ45 Receptacle to DB25F DCE Adapter for the SLB Device (PN 200.2067A) 5 6

Strany 193 - Audit Log

D: Adapters and Pinouts SLB™ Branch Office Manager User Guide 272 RJ45 Receptacle to DB9M DCE Adapter for the SLB Device (PN 200.2069A) 8 6 5

Strany 194 - Diagnostics

D: Adapters and Pinouts SLB™ Branch Office Manager User Guide 273 RJ45 Receptacle to DB9F DCE Adapter for the SLB Device (PN 200.2070A)

Strany 195

D: Adapters and Pinouts SLB™ Branch Office Manager User Guide 274 RJ45 to RJ45 Adapter for Netra/Sun/Cisco and SLP Device (PNs 200.2225 and ADP0101

Strany 196

SLB™ Branch Office Manager User Guide 275 E: Protocol Glossary BOOTP (Bootstrap Protocol) Similar to DHCP, but for smaller networks. Automatic

Strany 197

E: Protocol Glossary SLB™ Branch Office Manager User Guide 276 NMS (Network Management System) NMS acts as a central server, requesting and receivi

Strany 198 - Diagnostic Commands

E: Protocol Glossary SLB™ Branch Office Manager User Guide 277 TACACS+ (Terminal Access Controller Access Control System) A method of authenticatio

Strany 199 - Status/Reports

SLB™ Branch Office Manager User Guide 278 F: Compliance Information Manufacturer’s Name & Address: Lantronix, Inc., 167 Technology Drive,

Strany 200 - View Report

F: Compliance Information SLB™ Branch Office Manager User Guide 279 • EN 55022 — “Limits and Methods of Measurement of Radio Interference Characte

Strany 201

3: Installation SLB™ Branch Office Manager User Guide 28 Figure 3-4. SLB Installation Using the Integrated Ethernet Switch In Figure 3-5, the SLB

Strany 202 - Status Commands

F: Compliance Information SLB™ Branch Office Manager User Guide 280 RoHS Notice: All Lantronix products in the following families are China RoHS-

Strany 203 - There is no default

SLB™ Branch Office Manager User Guide 29 4: Quick Setup This chapter helps get the IP network port up and running quickly, so you can administ

Strany 204 - Events Commands

SLB™ Branch Office Manager User Guide 3 Disclaimer & Revisions Operation of this equipment in a residential area is likely to cause interferen

Strany 205

4: Quick Setup SLB™ Branch Office Manager User Guide 30 Method Description Front panel LCD display and pushbuttons You manually assign the IP addre

Strany 206 - 13: Application Examples

4: Quick Setup SLB™ Branch Office Manager User Guide 31 Note: Have your information handy as the display times out without accepting any unsaved ch

Strany 207

4: Quick Setup SLB™ Branch Office Manager User Guide 32 Note: If you have connected Eth1 to the network, and Eth1 is able to acquire an IP address

Strany 208

4: Quick Setup SLB™ Branch Office Manager User Guide 33 Restoring Factory Defaults To use the LCD display to restore factory default settings: 1.

Strany 209

4: Quick Setup SLB™ Branch Office Manager User Guide 34 4. To accept the defaults, select the Accept default Quick Setup settings checkbox in th

Strany 210

4: Quick Setup SLB™ Branch Office Manager User Guide 35 Eth 1 Settings Disabled: If selected, disables the network port. Default is Eth1 enabled.

Strany 211

4: Quick Setup SLB™ Branch Office Manager User Guide 36 Administrator Settings Sysadmin Password/ Retype Password To change the password (e.g., fro

Strany 212 - 14: Command Reference

4: Quick Setup SLB™ Branch Office Manager User Guide 37 Method #3 Quick Setup on the Command Line Interface If the SLB branch office manager does n

Strany 213 - Command Line Help

4: Quick Setup SLB™ Branch Office Manager User Guide 38 IP Address (if specifying) An IP address that will be unique and valid on your network and

Strany 214

4: Quick Setup SLB™ Branch Office Manager User Guide 39 Figure 4-3. Completed Quick Setup 5. To logout, type logout at the prompt and press Enter

Strany 215

SLB™ Branch Office Manager User Guide 4 Table of Contents Copyright & Trademark ___________________________________________________ 2 Open

Strany 216

SLB™ Branch Office Manager User Guide 40 5: Web and Command Line Interfaces The SLB branch office manager offers three interfaces for configur

Strany 217

5: Web and Command Line Interfaces SLB™ Branch Office Manager User Guide 41 Figure 5-1. Web Page Layout The web page has the following components:

Strany 218

5: Web and Command Line Interfaces SLB™ Branch Office Manager User Guide 42 Note: For specific instructions on completing the fields on the web pag

Strany 219

5: Web and Command Line Interfaces SLB™ Branch Office Manager User Guide 43 Command Line Interface A command line interface (CLI) is available for

Strany 220 - Audit Log Commands

5: Web and Command Line Interfaces SLB™ Branch Office Manager User Guide 44 Command Syntax Commands have the following format: <action> <c

Strany 221

5: Web and Command Line Interfaces SLB™ Branch Office Manager User Guide 45 Command Line Help For general Help and to display the commands to which

Strany 222

5: Web and Command Line Interfaces SLB™ Branch Office Manager User Guide 46 General CLI Commands The following commands relate to the CLI itself. T

Strany 223

SLB™ Branch Office Manager User Guide 47 6: Basic Parameters This chapter explains how to set the following basic configuration settings for t

Strany 224

6: Basic Parameters SLB™ Branch Office Manager User Guide 48 To enter settings for one or both network ports: 1. Click the Network tab and select

Strany 225

6: Basic Parameters SLB™ Branch Office Manager User Guide 49 Eth 1 and/or Eth 2 Settings Disabled: If selected, disables the network port. Defaults

Strany 226

SLB™ Branch Office Manager User Guide 5 Connecting Devices to Power Outlets ___________________________________________ 26 Connecting Devices to t

Strany 227

6: Basic Parameters SLB™ Branch Office Manager User Guide 50 Gateway Default IP address of the router for this network. If this has not been set m

Strany 228 - User Permissions Commands

6: Basic Parameters SLB™ Branch Office Manager User Guide 51 Hostname & Name Servers Hostname The default host name is slbXXXX, where XXXX is t

Strany 229

6: Basic Parameters SLB™ Branch Office Manager User Guide 52 Network Commands The following CLI commands correspond to the web page entries describ

Strany 230

6: Basic Parameters SLB™ Branch Office Manager User Guide 53 To view all network settings: show network all To view Ethernet port settings and coun

Strany 231 - CLI Commands

6: Basic Parameters SLB™ Branch Office Manager User Guide 54 Enabling IP Filters On the IP Filter page, you can enable all filters or disable all

Strany 232

6: Basic Parameters SLB™ Branch Office Manager User Guide 55 To add an IP filter: 1. On the IP Filter page, click the Add Ruleset button. The foll

Strany 233

6: Basic Parameters SLB™ Branch Office Manager User Guide 56 Port Range Enter a range of destination TCP or UDP port numbers to be tested. An entr

Strany 234

6: Basic Parameters SLB™ Branch Office Manager User Guide 57 To map a rule set to a network interface: 1. On the IP Filter page, select the IP fil

Strany 235

6: Basic Parameters SLB™ Branch Office Manager User Guide 58 Routing The SLB branch office manager allows you to define static routes and, for netw

Strany 236 - Custom User Menu Commands

6: Basic Parameters SLB™ Branch Office Manager User Guide 59 Note: To display the routing table, click the IP Routes Report link. The Status/Report

Strany 237 - Date and Time Commands

SLB™ Branch Office Manager User Guide 6 NFS and SMB/CIFS ____________________________________________________ 69 NFS and SMB/CIFS Commands ______

Strany 238 - Device Commands

SLB™ Branch Office Manager User Guide 60 7: Services System Logging and Other Services Use the Services page to:  Configure the amount of

Strany 239 - Device Port Commands

7: Services SLB™ Branch Office Manager User Guide 61 2. Enter the following settings: System Logging In the System Logging section, select one of

Strany 240

7: Services SLB™ Branch Office Manager User Guide 62 Remote Servers (#1 and #2) IP address of the remote server(s) where system logs are stored. T

Strany 241

7: Services SLB™ Branch Office Manager User Guide 63 Web Telnet Enables or disables the ability to access the SLB command Iine interface or device

Strany 242

7: Services SLB™ Branch Office Manager User Guide 64 SNMP Simple Network Management Protocol (SNMP) is a set of protocols for managing complex netw

Strany 243

7: Services SLB™ Branch Office Manager User Guide 65 NMS When SNMP is enabled, an NMS (Network Management System) acts as a central server, request

Strany 244 - End Device Commands

7: Services SLB™ Branch Office Manager User Guide 66 V3 Read-Only User User Name SNMP v3 is secure and requires user-based authorization to access

Strany 245

7: Services SLB™ Branch Office Manager User Guide 67 location <Physical Location> netlog <off|error|warning|info|debug> nms <IP Ad

Strany 246

7: Services SLB™ Branch Office Manager User Guide 68 To view current services: show services

Strany 247 - IP Filter Commands

7: Services SLB™ Branch Office Manager User Guide 69 NFS and SMB/CIFS Use the NFS & SMB/CIFS page if you want to save configuration and logging

Strany 248

SLB™ Branch Office Manager User Guide 7 Remote Access Server _____________________________________________________ 126 Reverse Terminal Server____

Strany 249 - Network Commands

7: Services SLB™ Branch Office Manager User Guide 70 2. Enter the following for up to three directories: NFS Mounts Remote Directory The remote N

Strany 250

7: Services SLB™ Branch Office Manager User Guide 71 Network Interfaces Select the network ports from which the share can be seen. The default is f

Strany 251 - NFS and SMB/CIFS Commands

7: Services SLB™ Branch Office Manager User Guide 72 To configure the SMB/CIFS share, which contains the system and device port logs: set cifs <

Strany 252

7: Services SLB™ Branch Office Manager User Guide 73 2. To manage a secure IT management device, click its IP Address. A separate browser page t

Strany 253 - PC Card Storage Commands

7: Services SLB™ Branch Office Manager User Guide 74 Above the table, the Telnet to the CLI Enabled and SSH to the CLI Enabled fields indicate whe

Strany 254

7: Services SLB™ Branch Office Manager User Guide 75 c) To open a Telnet session to a specific device port, click the Yes link in the Telnet Enabl

Strany 255 - Power Commands

7: Services SLB™ Branch Office Manager User Guide 76 Secure Lantronix Network Commands The following commands for the command line interface corres

Strany 256 - Routing Commands

7: Services SLB™ Branch Office Manager User Guide 77 2. Enter the following: Change Date/Time Select the checkbox to manually enter the date and

Strany 257 - Services Commands

7: Services SLB™ Branch Office Manager User Guide 78 Synchronize via Select one of the following: Broadcast from NTP Server: Enables the SLB branch

Strany 258 - SLB Network Commands

7: Services SLB™ Branch Office Manager User Guide 79 To synchronize the SLB branch office manager with a remote time server using NTP: set ntp <

Strany 259 - SSH Key Commands

SLB™ Branch Office Manager User Guide 8 13: Application Examples 206 Telnet/SSH to a Remote Device __________________________________________ 20

Strany 260

SLB™ Branch Office Manager User Guide 80 8: Device Ports This chapter describes how to configure and use an SLB branch office manager device p

Strany 261

8: Device Ports SLB™ Branch Office Manager User Guide 81 Permissions There are three types of permissions:  Direct (or data) mode: The user can i

Strany 262 - System Log Commands

8: Device Ports SLB™ Branch Office Manager User Guide 82 Current port numbering schemes for Telnet, SSH, and TCP ports display on the left. The l

Strany 263 - Description

8: Device Ports SLB™ Branch Office Manager User Guide 83 Starting SSH Port Each port is assigned a number for connecting via SSH. Enter a number (1

Strany 264 - A: Bootloader

8: Device Ports SLB™ Branch Office Manager User Guide 84 To configure settings for all or a group of device ports: set deviceport global <one or

Strany 265 - Administrator Commands

8: Device Ports SLB™ Branch Office Manager User Guide 85  Click the desired port number in the green bar (shown below) at the top of any page: T

Strany 266 - B: Security Considerations

8: Device Ports SLB™ Branch Office Manager User Guide 86 To enter device port settings: 1. Enter the following: Mode The status of the port; displ

Strany 267 - C: Safety Information

8: Device Ports SLB™ Branch Office Manager User Guide 87 IP Address IP address used for this device port so a user can Telnet, SSH, or establish a

Strany 268 - Port Connections

8: Device Ports SLB™ Branch Office Manager User Guide 88 Show Lines on Connecting If enabled, when the user either does a connect direct from the C

Strany 269 - D: Adapters and Pinouts

8: Device Ports SLB™ Branch Office Manager User Guide 89 Initialization Script Commands sent to configure the modem may have up to 100 characters.

Strany 270 - DB25 Male

SLB™ Branch Office Manager User Guide 9 Accessing the Bootloader _______________________________________________ 264 Bootload Commands___________

Strany 271 - DB25 Female

8: Device Ports SLB™ Branch Office Manager User Guide 90 Modem Settings: PPP Mode Negotiate IP Address If the SLB branch office manager and/or the

Strany 272 - DB9 Male

8: Device Ports SLB™ Branch Office Manager User Guide 91 Restart Delay The number of seconds after the timeout and before the SLB branch office man

Strany 273 - DB9 Female

8: Device Ports SLB™ Branch Office Manager User Guide 92 To open the Device Ports – SLP page: 1. In the Connected to field above the IP Settings s

Strany 274

8: Device Ports SLB™ Branch Office Manager User Guide 93 Infeed Status Click the link to view the status of the data the SLP power manager is recei

Strany 275 - E: Protocol Glossary

8: Device Ports SLB™ Branch Office Manager User Guide 94 Humidity (%) Current relative humidity on the device the sensor is monitoring. Low Humidit

Strany 276

8: Device Ports SLB™ Branch Office Manager User Guide 95 dialoutpassword <Password> dialbacknumber <usernumber|Phone Number> dodauth &l

Strany 277

8: Device Ports SLB™ Branch Office Manager User Guide 96 To view the settings for one or more device ports: show deviceport port <Device Port Li

Strany 278 - F: Compliance Information

8: Device Ports SLB™ Branch Office Manager User Guide 97 single outlet. slp envmon Displays the environmental status (e.g., temperature and humidit

Strany 279

8: Device Ports SLB™ Branch Office Manager User Guide 98 To connect to a device port to monitor and/or interact with it, or to establish an outboun

Strany 280

8: Device Ports SLB™ Branch Office Manager User Guide 99 only the oldest data is lost, and only in the amount of overrun (not in large blocks of me

Komentáře k této Příručce

Žádné komentáře