Lantronix MPS100 Instalační příručka stáhnout pdf (Strana 77)

TCP/IP Host Setup Reverse Telnet (RTEL)

7-17

7.3.6 Creating a BSD Print Queue Using RTELPD

To create a generic BSD print queue using the RTELPD pipe daemon,

1 Create a named pipe as shown in Figure 7-17.

2 Edit the /etc/printcap file and insert an entry in the following form to create a simple queue.

Figure 7-19: Editing the /etc/printcap File

Note: See the RTELPD man pages for specific examples of configuring a print queue

for each supported system type.

3 Test the queue. Ensure that the RTELPD daemon is running and print a job; the output should appear

on the printer.

7.3.7 Creating a SYSV Print Queue Using RTELPD

To create a generic SYSV print queue using the RTEL pipe daemon,

1 Create a named pipe as shown in Figure 7-17.

2 Issue the following commands to create a simple queue.

Figure 7-20: Creating a SYSV Print Queue

Test the queue. Ensure that the RTELPD daemon is running and print a job; the output should appear

on the printer.

Note: See the RTELPD man pages for specific examples of configuring a print queue

for each supported system type.

rtel_prt:\

:lp=/dev/rtp1:|

:sd=/usr/spool/lpd:

# /usr/lib/lpshut

# /usr/lib/lpadmin -prtel_prt \

-i/usr/spool/lp/model/dumb \

-v/dev/rtp1

# /usr/bin/enable rtel_prt

# /usr/lib/accept rtel_prt

# /usr/lib/lpsched

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 222 223

Žádné komentáře

Lantronix MPS100 Instalační příručka Strana 77