Lantronix Computer Hardware 900-581 Uživatelský manuál stáhnout pdf (Strana 191)

5: Commands and Levels

duplex half

Sets duplex mode to half.

exit

Exit back to interface configuration level

show

Displays the current configuration.

show history

Displays the last 20 commands entered during the current CLI

session.

speed 10

Sets the speed of the Ethernet link to 10 Mbps.

speed 100

Sets the speed of the Ethernet link to 100 Mbps.

speed auto

Sets the speed of the Ethernet link to auto-negotiate.

write

Stores the current configuration in permanent memory.

log (config-diagnostics-log) level commands

clrscrn

Clears the screen.

default max length

Restores the factory default maximum Log file size.

default output

Restores the default log output, which is disable.

exit

Exits to the next higher level.

max length <Kbytes>

Sets the maximum size in Kbytes for the Log file.

output disable

Disables log output.

output filesystem

Enables log to filesystem.

output line <number>

Enables log to serial line.

show

Shows the current configuration.

show history

Displays the last 20 commands entered during the current CLI

session.

write

Stores the current configuration in permanent memory.

modem (tunnel-modem:3) level commands

clrscrn

Clears the screen.

connect string <text>

Sets the CONNECT string used in modem emulation.

<string> = connect string.

default incoming connection

Default disables incoming network connections.

default response type

Default uses text type responses.

display remote ip disable

The incoming RING has nothing following it.

display remote ip enable

The incoming RING is followed by the IP address of the caller.

echo commands disable

Does not echo modem commands.

echo commands enable

Echoes modem commands.

echo pluses disable

Does not echo the +++ characters when entering modem com-

mand mode.

echo pluses enable

Echoes the +++ characters when entering modem command

mode.

error unknown commands disable

Returns OK on unknown AT commands.

error unknown commands enable

Returns an error upon unknown AT commands.

exit

Returns to the tunnel level.

incoming connection automatic

Automatically answer incoming network connections.

incoming connection disabled

Disable incoming network connections.

incoming connection manual

Wait for an ATA command before answering an incoming network

connection.

no connect string

Removes optional CONNECT string information for modem emu-

lation.

reassert

Asserts tunnel modem status with current configured values.

PremierWave EN Command Reference 191

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 211 212

Komentáře k této Příručce

Žádné komentáře

Lantronix Computer Hardware 900-581 Uživatelský manuál Strana 191

Komentáře k této Příručce

Související produkty a manuály pro Sítě Lantronix Computer Hardware 900-581